RTD & Thermocouple Calibrator PIE 525B | Advanced troubleshooting tools

$1,674.00

  • Calibrate T/C instruments to 0.1 & 0.01 °F & °C
    Types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel): -13.000 to 80.000 mV
  • Calibrate RTD instruments to 0.1 & 0.01 °F & °C
    Pt 10, 50, 100, 200, 500 & 1000 Ohm (3850)
    Pt 100 Ohm (alpha=3902, 3916, 3926)
    Cu 10 & 50 Ohm and Ni 120 Ohm
  • Calibrate with Confidence
    Resolution to 0.01 °F & °C; accurate to 0.2°
    Cold Junction Sensor accurate to 0.05°C
  • Verify Heat Treating Uniformity Survey Recorders and perform System Accuracy Tests
    The PIE 525B is capable of meeting the requirements of an AMS 2750 Field Test Instrument when certified by an accredited laboratory.
  • Troubleshoot RTD Sensors & Instruments
    Automatic detection of 2, 3 or 4 wire connections indicates when individual wire connections are open. Verify proper instrument operation by measuring the excitation current.
  • Faster Calibrations
    Instantly select three outputs with EZ-CHECK switch
    Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping
  • Easily Change T/C and RTD Types & Scale
    Double click to select T/C or RTD type & °F & °C
  • Use in the Plant, Field or Shop
    Includes Rubber Boot and mV Test Leads
    Low profile switches resist accidental damage
    Brass screws for T/C wires plus mini T/C socket
  • Easy-to-Read Display
    Turn on the backlight to read in dark areas of the plant
  • Simple “No Tool” Battery Changes
    Four inexpensive “AA” batteries
  • Verify Resistance, Cold Junction Temperature & Output
    Secondary Display of Resistance for RTDs and compensated millivolt setting and cold junction temperature for T/C.
  • Optional Accessories
    Wire & Mini T/C Plug: J, T, E, K (020-0202); B, R/S, K (020-0203)

Description

Improvements over the PIE 525 Thermocouple & RTD calibator

PIE is pleased to introduce the New Model 525B which replaces the PIE Model 525. This moves our Dual Thermocouple & RTD calibrator to the PIE Evolution enclosure with a rubber boot, tilt stand, 4 “AA” batteries and backlit display. Not only did we move the product into the new enclosure, we made a number of other improvements!

  • Increased number of T/C types from 10 to 14
  • Added RTD types for Platinum 10, 50, 200 & 500 Ohm for the 1.3850 (IEC 751/DIN) curve
  • More accurate & stable cold junction compensation
    NIST Traceable Cold Junction Sensor in isothermal block
  • Secondary display
    Shows millivolts and cold junction temperature while displaying thermocouple temperature and shows ohms while displaying RTD temperature
  • Troubleshoot RTD Sensors & Instruments
    Automatic detection of 2, 3 or 4 wire connections indicates when individual wire connections are open. Verify proper instrument operation by measuring the excitation current

Additional information

Weight 2 lbs
Dimensions 7.75 x 5.25 x 4.5 in

Datasheet, Manual & Cal Procedure

Reviews

There are no reviews yet.

Be the first to review “RTD & Thermocouple Calibrator PIE 525B | Advanced troubleshooting tools”
© 2005- Practical Instrument Electronics, Inc. (PIE)