Automated Source and Read RTD calibrator PIE 211


  • Calibrate with Ease
    Resolution to 0.1 °F & °C; Accurate to 0.2°
  • Source and Read Multiple RTD Curves plus Ω
    Platinum 100 Ω: 1.3850, 1.3902, 1.3916, 1.3926
    Platinum 1000 Ω: 1.3850, 1.3750 (Pt 1000 Ω limited to 266.0°C/511.0°F)
    Copper 10 & 50 Ω; Nickel 120 Ω;0.00 to 2001.0 Ω
    Custom ranges available – consult factory
  • Automatically Detect 2, 3 & 4 Wire Connections
    Troubleshoot sensor connections & find broken wires with patented technology. Easy hookups – all connections are indicated on the display.
  • Guaranteed Compatible with all Instrumentation
    Works with Rosemount, Honeywell and other brands of Smart Transmitters, PLCs, DCSs, Multi-channel Recorders and other pulsed excitation devices.
  • Faster Calibrations
    Instantly select three outputs with EZ-CHECK switch
    Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping
  • Easily Change RTD Types & Scale
    Double click to select RTD Type & °F & °C
  • Easy-to-Read Display
    Turn on the backlight to read in dark areas of the plant
  • Simple “No Tool” Battery Changes
    Four inexpensive “AA” batteries
  • Includes Rubber Boot, Deluxe Hands Free Carrying Case & RTD Test Leads (020-0208)

Product Description

PIE 211  vs Altek 211 - Suggested replacement PIE 211

Advantages of the PIE 211 over the Altek 211 RTD calibrator

  • Compatible with Newer Instrumentation
    Works with Rosemount & Honeywell Smart Transmitters, PLCs, DCSs, Multi-channel Recorders and other pulsed excitation devices. Higher accuracy at low excitation curents.
  • Automatic Stepping
  • Larger Display with Backlight
    Easy viewing in dark locations
  • Easily Change RTD Types
    Reconfigure without resetting calibrator
  • More Resistant to Accidental Damage
    Rubber Boot and Stronger Switches
  • Separate Battery Compartment
    No more removing housing with screwdriver to replace batteries
    Calibration seals remain intact
  • Includes Certificate of Calibration
    All PIE Calibrators come with a free signed and dated certificate. Altek’s come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.

Additional Information

Weight 2 lbs
Dimensions 7.75 x 5.25 x 4.5 in

Datasheet, Manual & Cal Procedure


There are no reviews yet.

Be the first to review “Automated Source and Read RTD calibrator PIE 211”

Your email address will not be published. Required fields are marked *

© 2005- Practical Instrument Electronics, Inc. (PIE)